[US ONLY] Discontinued Digital LED IC Tester and Detector Meter for MOS, PNP, NPN Component Maintenance

$73.20

Description

SPECIFICATION

Catalogue

Function

Search

Auto?mode

Device?search?,?the?unknown?model?chip?inserted?in?ic?seat?can?automatically?identify?the?part?number
(?Automatic?identification?without?input)?(?other?directories?are?auto-?mode?)

5.0v?mode

3.3v?mode

74HC

74HC?series?of?logic?device?test?(of?the?same,?and?74LS?series?base?drive?level?(different)?need?to?manually?enter?the?model)

74LS

74LS?series?of?logic?device?test?(of?the?same,?and?74HC?series?base?drive?level?(different)?need?to?manually?enter?the?model)

CD40

CD4000?series?of?logic?device?test?(different,?and?HEF40?series?base?drive?level?(the?same)?need?to?manually?enter?the?model)

HEF40

HEF4000?series?of?logic?device?test?(different,?and?CD40?series?base?drive?level?(the?same)?need?to?manually?enter?the?model)

45/145

45?series?145?series?logic?device?test?(the?need?to?manually?enter?the?model)

OTHER

Interface?drive?device?testing,?such?as:?MAX232,?MAX485,?75175,?75176,?75c11..?(the?need?to?manually?select?the?model)

AMP

Operational?amplifier,?comparator?class?testing,?such?as:?LM324,?LM358,?LM339,?LM393,?LM2902…(the?need?to?manually?enter?the?model).

????TR

Transistor?identification?,?and?automatically?determine?the?transistor?
types?and?pin?order?.?Identifiable?NPN?,?PNP,?transistors?,?N-?MOS?,?P?-MOS?way?thyristor?,?triac?,?common?anode?common?cathode?rectifier
?automatic?identification?without?input?)

ZD

Zener?regulator?value?test?,?test?regulator?regulator?0v-50v?range?accuracy?0.01v?automatic?identification?without?the?need?to?enter?

LIGHT

Optocoupler?secondary?the?saturation?voltage?test?,?can?test?the?the?ordinary?4?feet?optocoupler?secondary?
saturation?voltage?automatic?identification?without?input?)

OFF

Shutdown

The panel has 5 buttons are on the left, right, bottom, and Enter keys.
The next key is used to adjust the directory and change the model number, the or so key to move around the cursor options to change.The Enter key for the switch machine and execute the test command.Gently open the battery cover, add a 2X1.5V laminated battery, and then close the battery cover.Press Enter for more than 2 seconds can boot, boot automatically display the current battery voltage, when the voltage is lower than 2.5V, please replace the battery, the low voltage will affect the reliability of the test result and protection automatic shutdown.
Boot: Enter key press 2 seconds then boot.
Shutdown: 1 in the OFF directory, press Enter button to immediately shutdown.
2 in any directory, press Enter button for more than 10 seconds then off.
3 in no operation after 60 seconds, automatic shutdown
ethods of devices placed:
1, the top of the chip alignment
2, put the most left transistor three slot
3, a 13 foot alignment IC Optocoupler
4, voltage regulator tubes placed IC block 13 and 14 feet.

Note: the transistor display pin order from left to right and the corresponding IC block, 10 feet, 11 feet, 12 feet

rompt

explanation

OK

Tests?are?normal

Batter

Battery?voltage

Not?found

Can’t?find

Fault

The?chip?damaged?or?type?mismatch

Open

Open?circuit

Not?supported

non-support

NPN

Triode

?PNP

Triode

??N-MOS

FET

P-MOS

FET

1-SCR

Way?SCR

2-SCR

Triac

2D

Common?cathode?and?common?anode?rectifier

A?k?b?c?e?g

Specific?pin

Out?of?range

Zener?voltage?beyond?the?scope?

ERR1?2

Self-test?failure

?

WHAT’S IN THE PACKAGE
  • 1 x Digital lcd Transistor Tester (not include battery)
Documents:

?