[Discontinued] NRF24L01+PA+LNA Wireless Module Integrated with an Antenna

Description

SPECIFICATION

• The nRF24L01+ is a 2.4GHz ISM band transceiver
• Range: 800+ meters line of sight
• Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier)
• A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
• The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V.
• The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
• Weight: 13.28 g (0.468 oz)
• Board dimensions, excluding pins: 15.5mm (0.61/) width x 40.7mm (1.6/) length x 12.2mm (0.48/) height
• Dimensions of antenna, when angled at 90 degrees: 87mm (3.43/) height x 9.5mm (0.37/) diameter

WHAT’S IN THE PACKAGE

• 1x Wireless Module
• 1x Antenna ? ? ? ? ? ? ?

?