Air-assist Pump Kit for Laser Engraver and Laser Module – Discontinued

Why Air-Assist System is a must-have add-on for your laser engraver and cutter?

1. It regulates the laser beam to be more precise and keeps your workpiece cool, so your engraving and cutting jobs will have a cleaner finish.
2. It reduces the laser power loss by pushing smoke and residues away from the material, so your laser work can be done faster with an enhanced finish.
3. It also protects your laser from residue buildup and overheating, improving the service life of your laser module.

Specification:

• Nozzle diameter: 6mm
• Recommended Hose Diameter: 5mm
• Flow Rate: 8PLM
• Power: DC12V
• Rated Current 0.6A
• Maximum Vacuum Pressure: -55KPa
• Maximum Positive Pressure: 80KPa
• Lifespan: ≥500 hours

??Compatibility

• Fixed Focus Laser Module (Should work with an additional 12V power supply)
• Jinsoku LE-1620
• Jinsoku LC-60A

Jinsoku LC-60A

?? Plug the 2-Pin connectors to the mainboard.

?? The software can control the start and stop of the air pump.

Jinsoku LE-1620

?? Plug the 2-Pin connectors to the mainboard.

?? The software CANNOT control the start and stop of the air pump.

3018-PROVer/LE5040/Other Genmitsu machines

?? Additional 12V input power supply is required to run the air pump on these machines.
?? Power supply is suggested to be 12V 1A with DC5.5*2.5 interface.

?? The software CANNOT control the start and stop of the air pump.