Description
DESCRIPTION
?
SainSmart Mega2560
|
Microcontroller |
ATmega2560 |
|
Operating Voltage |
5V |
|
Input Voltage (recommended) |
7-12V |
|
Input Voltage (limits) |
6-20V |
|
Digital I/O Pins |
54 (of which 15 provide PWM output) |
|
Analog Input Pins |
16 |
|
DC Current per I/O Pin |
40 mA |
|
DC Current for 3.3V Pin |
50 mA |
|
Flash Memory |
256 KB of which 8 KB used by bootloader |
|
SRAM |
8 KB |
|
EEPROM |
4 KB |
|
Clock Speed |
16?MHz |
?
?
SainSmart Ethernet Schield W5l00
SainSmart Ethernet W5100?allows?a connection?to the Internet?one?Arduino?board.?It?is?based on the?Wiznet?W5100?Ethernet chip.?The?Wiznet?W5100?provides a network?(IP)?stack?capable of both?TCP and?UDP.?It?supports up?to four simultaneous?socket connections.?Use the?Ethernet?library?to write?to?the Internet?verbindeten?sketches?by?the sign.It has?embedded the ?transformer buffer?and ?has more?overall?electric circuit.
?
The?new Ethernet?Shield?now includes a?Micro?SD?card connector,?it?is?MEGA-compatible and?an on-board?reset controller.
The Ethernet?shield?connects to an?Arduino board?and?used?a long?wire-wrap?headers which?extend?through the shield. This?keeps?the pin layout?intact and?allows?a further?stacking on?the upper side.
Arduino?uses digital?pins 10, 11,?12 and 13 (SPI) to?communicate with the?W5100?on the Ethernet?shield.?These pinscan?not?be?used?for general?I/O.
- Brand new and high quality.
- With this Ethernet Shield, your Arduino board can be used to connect to internet.
- Can be used as server or client.
- Directly plug puzzle board, no soldering required.
- Controller: w5100.
- This is the latest version of the Ethernet Shield.
- This Ethernet Shield for Arduino which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
- It is directly supported by Arduino official Ethernet Library.
- It adds a micro-SD card slot, which can be used to store files for serving over the network.
- It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
- The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
- It supports up to four simultaneous socket connections.
- Use the Ethernet library to write sketches which connect to the internet using the shield.
- Fits all version of arduino Main board,2009,UNO, mega 1280, mega 2560.
- Size: 7cm x 5.4cm x 2.4cm – 2.76inch x 2.12inch x 0.94inch.
MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };.
Note:?The following just shows the normal W5100 Ethernet Shield,It?has not?embedded the ?transformer buffer?and ?the?electric circuit is limited than the sainsmart W5100. Of course ,it is more cheaper.
?
WHAT’S IN THE PACKAGE
- 1 x SainSmart Mega2560
- 1 x SainSmart Ethernet Shield
- 1 x USB Cable

Rating & Review
There are no reviews yet.